FILTER PRESSURE REGULATOR + LUBRICATOR

FILTER - PRESSURE REGULATOR

Filter pressure regulator + Lubricator
17006B.B.D.P(G1/4″)
17206A.B.D(G1/4″)
17206B.B.D(G3/8″)
17306B.B.C(G1/2″)
17306B.B.C.S(G1/2″ auto drain)
17306E.B.C(G3/4″)
     VERSION
0, 2, 3 = Zinc alloy body
     CONNECTIONS
Port  = G 1/2″, G 1/4″, G 3/8″, G 3/4″
     TYPE
Filter = 20μ  Bowl protection , Automatic drain
Pressure range = 0-8 bar, 0 – 12 bar
Max working pressure (bar) : 13 bar – 1.3 MPa
Temperature  : 50°C

หมายเหตุ : เป็นสินค้าราคาขายเงินสดเท่านั้น

Ordering code

17v04c.s.g.t.o

V

VERSION
0 = Zinc alloy body
1 = Technopolymer body

C

CONNECTIONS
A = G 1/8″
B = G 1/4″

S

FILTER PORE SIZE
A = 5µ
B = 20µ
C = 50µ

G

ADJUSTING RANGE
A = 0 – 2 bar
B = 0 – 4 bar
C = 0 – 8 bar
D = 0 – 12 bar

T

TYPE
P = Bowl protection
S = Automatic drain
PS = Bowl protection and Automatic drain

O

OPTION
Standard (without options)
K = Version with padlock

Flow rate curves

Adjustment characteristics

Operational characteristic

  • Filter – diaphragm pressure regulator with relieving.
  • Balanced poppet.
  • Double filtering action: by air centrifuging and by replaceable and reusable HDPE porous filter
    element.
  • Zinc alloy body reinforced technopolymer body with threaded aluminum insert connections
  • Wall mounting possibility with M4 screws protected by covers.
  • Lockable handle by simply pressing it downwards in the desired position.
  • Transparent technopolymer bowls screwed to the body.
  • Shock resistant bowl technopolymer protections.
  • Manual and semi-automatic water drain valve; in the semi-automatic version the drainage happens when there is no pressure or by pushing the valve up-wards.
  • Possibility to see the water level on 360° also with bowl protection assembled.
  • Two pressure gauge connections with plug complete of seal.
  • Panel mounting bracket.
  • Automatic water drainage bowl available on request.
  • Fog type lubrication with variable section orifice according to the flow.
  • Possibility to see the min. and max. oil level on 360° also with bowl protection assembled.
  • Transparent technopolymer sight dome with adjusting handle.
  • Oil filling plug.

Technical characteristic

Connections G 1/8″ – G 1/4″
Max working pressure (bar) 13 bar – 1,3 MPa
Temperature °C 50°C
Pressure gauge connections G 1/8″
Weight with technopolymer body gr. 295
Weight with zinc alloy body gr. 560
Pressure range (bar) 0 – 2 / 0 – 4 / 0 – 8 / 0 – 12
Filter pore size 5µ – 20µ – 50µ
Bowl capacity 20 cm³
Indicative oil drip rate 1 drop every 300/600 Nl
Oil type FD22 – HG32
Bowl capacity 36 cm³
Assembly position Vertical
Wall fixing screw M4
Max. fittings torque on zinc alloy body 30 Nm
Max. fittings torque on technopolymer body 15 Nm
Min. operational flow at 6,3 bar 10 Nl/min.