FILTER - PRESSURE REGULATOR
FILTER - PRESSURE REGULATOR
| Filter – pressure regulator | |
| 17004B.B.D.P (G1/4″) | |
| 17204A.B.D (G1/4″) | |
| 17204B.B.D (G3/8″) | |
| 17304B.B.C (G1/2″) | |
| 17304B.B.C.S (G1/2″ auto drain) | |
| 17304E.B.C (G3/4″) | |
| CONNECTIONS | |
| Port = G 1/2″, G 1/4″, G 3/8″, G 3/4″ | |
| Pressure range = 0-8 bar, 0 – 12 bar | |
| TYPE | |
| Filter = 20μ Bowl protection , Automatic drain | |
| Max working pressure (bar) : 13 bar – 1.3 MPa | |
| Temperature : 50°C |
หมายเหตุ : เป็นสินค้าราคาขายเงินสดเท่านั้น
Ordering code
17v04c.s.g.t.o
| V | VERSION |
| 0 = Zinc alloy body | |
| 1 = Technopolymer body | |
| C | CONNECTIONS |
| A = G 1/8″ | |
| B = G 1/4″ | |
| S | FILTER PORE SIZE |
| A = 5µ | |
| B = 20µ | |
| C = 50µ | |
| G | ADJUSTING RANGE |
| A = 0 – 2 bar | |
| B = 0 – 4 bar | |
| C = 0 – 8 bar | |
| D = 0 – 12 bar | |
| T | TYPE |
| P = Bowl protection | |
| S = Automatic drain | |
| PS = Bowl protection and Automatic drain | |
| O | OPTION
Standard (without options) |
| K = Version with padlock |
Flow rate curves
Adjustment characteristics
Operational characteristic
- Filter – diaphragm pressure regulator with relieving.
- Balanced poppet.
- Double filtering action: by air centrifuging and by replaceable and reusable HDPE porous filter
element. - Zinc alloy body or reinforced tecnopolymer body with threaded aluminium insert connections.
- Wall mounting possibility with M4 screws protected by covers.
- Handle lockable in the desired position by simply pressing it downwards.
- Transparent technopolymer bowl screwed to the body.
- Technopolymer shock resistant bowl protection.
- Manual and semi-automatic water drain valve; in the semi-automatic version the drainage happens when there is no pressure or by pushing the valve up-wards.
- Possibility to see the water level on 360° also with bowl protection assembled.
- Two pressure gauge connections with plug complete of seal.
- Panel mounting bracket.
- Automatic water drainage bowl available on request.
Technical characteristic
| Connections | G 1/8″ – G 1/4″ |
| Max working pressure (bar) | 13 bar – 1,3 MPa |
| Minimum working pressure with automatic drain (bar) | 0,5 |
| Maximum working pressure with automatic drain (bar) | 10 |
| Temperature °C | 50°C |
| Pressure gauge connections | G 1/8″ |
| Weight with technopolymer body | gr. 180 |
| Weight with zinc alloy body | gr. 295 |
| Pressure range (bar) | 0 – 2 / 0 – 4 / 0 – 8 / 0 – 12 |
| Filter pore size | 5 – 20µ – 50µ |
| Bowl capacity | 20 cm³ |
| Assembly position | Vertical |
| Wall fixing screw | M4 |
| Max. fittings torque on zinc alloy body | 30 Nm |
| Max. fittings torque on technopolymer body | 15 Nm |
